Internal Tube Cutter Type TC 58 Made in Germany
TECHNODATA Internal Tube Cutter
The internal tube cutter type TC 58 is designed to cut inside the tube, by non - accessibility from outside. This tool will be drived by a driving motor with suitable speed and sufficient torque. The guiding follows by hand. The centering inside the tube takes place by ball guiding at the cutting procedure, also outside by a cone ring. By an adjustment ring you can set the reach. The cutting bodies are available in reach from 100mm - 400mm.

A very high flexibility is warranted, by two coupling sizes with different changeable "KIT´S" for each range of tube, diameter , as shown below in the technical data sheet.
Technical Data :
Size Tube Inside-Ø Tube Outside-Ø Cage-Ø
095 mms 10 -12 mms 15,0 mms 9,5 mms
105 mms 11 -13 mms 18,0 mms 10,5 mms
115 mms 12 -14 mms 19,0 mms 11,5 mms
125 mms 13 -15 mms 20,0 mms 12,5 mms
135 mms 14 -17 mms 23,0 mms 13,5 mms
155 mms 16 -19 mms 25,0 mms 15,5 mms
175 mms 18 - 21 mms 27,0 mms 17,5 mms
195 mms 20 - 25 mms 34,0 mms 19,5 mms
245 mms 25 - 30 mms 38,0 mms 24,5 mms
290 mms 30 - 35 mms 43,0 mms 29,5 mms
330 mms 35 - 40 mms 48,0 mms 33,0 mms
380 mms 40 - 50 mms 58,0 mms 38,0 mms
480 mms 50 - 60 mms 68,0 mms 48,0 mms
530 mms 55 - 65 mms 73,0 mms 53,0 mms
630 mms 65 - 75 mms 83,0 mms 63,0 mms
730 mms 75 - 85 mms 93,0 mms 73,0 mms
830 mms 85 - 95 mms 103,0 mms 83,0 mms
930 mms 95 -105 mms 113,0 mms 93,0 mms
Download TDA - Internal
Tube Cutter CATALOG
Email us directly at
info@pioneerintertrade.com
Call us directly at
022 - 6678 7700


Send Product Info
Send Quotations
Contact me
Name:
Company:
Email:
Mobile:
Comments:
Enter verification code :